update code

laradock/php-fpm/Dockerfile

@@ -0,0 +1,964 @@
+#
+#--------------------------------------------------------------------------
+# Image Setup
+#--------------------------------------------------------------------------
+#
+# To edit the 'php-fpm' base Image, visit its repository on Github
+#    https://github.com/Laradock/php-fpm
+#
+# To change its version, see the available Tags on the Docker Hub:
+#    https://hub.docker.com/r/laradock/php-fpm/tags/
+#
+# Note: Base Image name format {image-tag}-{php-version}
+#
+
+ARG LARADOCK_PHP_VERSION
+ARG BASE_IMAGE_TAG_PREFIX=latest
+FROM laradock/php-fpm:${BASE_IMAGE_TAG_PREFIX}-${LARADOCK_PHP_VERSION}
+
+LABEL maintainer="Mahmoud Zalt <mahmoud@zalt.me>"
+
+ARG LARADOCK_PHP_VERSION
+
+# Set Environment Variables
+ENV DEBIAN_FRONTEND noninteractive
+
+# If you're in China, or you need to change sources, will be set CHANGE_SOURCE to true in .env.
+
+ARG CHANGE_SOURCE=false
+RUN if [ ${CHANGE_SOURCE} = true ]; then \
+    # Change application source from deb.debian.org to aliyun source
+    sed -i 's/deb.debian.org/mirrors.tuna.tsinghua.edu.cn/' /etc/apt/sources.list && \
+    sed -i 's/security.debian.org/mirrors.tuna.tsinghua.edu.cn/' /etc/apt/sources.list && \
+    sed -i 's/security-cdn.debian.org/mirrors.tuna.tsinghua.edu.cn/' /etc/apt/sources.list \
+;fi
+
+# always run apt update when start and after add new source list, then clean up at end.
+RUN set -xe; \
+    apt-get update -yqq && \
+    pecl channel-update pecl.php.net && \
+    apt-get install -yqq \
+      apt-utils \
+      #
+      #--------------------------------------------------------------------------
+      # Mandatory Software's Installation
+      #--------------------------------------------------------------------------
+      #
+      # Mandatory Software's such as ("mcrypt", "pdo_mysql", "libssl-dev", ....)
+      # are installed on the base image 'laradock/php-fpm' image. If you want
+      # to add more Software's or remove existing one, you need to edit the
+      # base image (https://github.com/Laradock/php-fpm).
+      #
+      # next lines are here becase there is no auto build on dockerhub see https://github.com/laradock/laradock/pull/1903#issuecomment-463142846
+      libzip-dev zip unzip && \
+      if [ ${LARADOCK_PHP_VERSION} = "7.3" ] || [ ${LARADOCK_PHP_VERSION} = "7.4" ]; then \
+        docker-php-ext-configure zip; \
+      else \
+        docker-php-ext-configure zip --with-libzip; \
+      fi && \
+      # Install the zip extension
+      docker-php-ext-install zip && \
+      php -m | grep -q 'zip'
+
+#
+#--------------------------------------------------------------------------
+# Optional Software's Installation
+#--------------------------------------------------------------------------
+#
+# Optional Software's will only be installed if you set them to `true`
+# in the `docker-compose.yml` before the build.
+# Example:
+#   - INSTALL_SOAP=true
+#
+
+###########################################################################
+# BZ2:
+###########################################################################
+
+ARG INSTALL_BZ2=false
+RUN if [ ${INSTALL_BZ2} = true ]; then \
+  apt-get -y install libbz2-dev; \
+  docker-php-ext-install bz2 \
+;fi
+
+###########################################################################
+# GMP (GNU Multiple Precision):
+###########################################################################
+
+ARG INSTALL_GMP=false
+
+RUN if [ ${INSTALL_GMP} = true ]; then \
+    # Install the GMP extension
+	  apt-get install -y libgmp-dev && \
+    if [ $(php -r "echo PHP_MAJOR_VERSION;") = "5" ]; then \
+      ln -s /usr/include/x86_64-linux-gnu/gmp.h /usr/include/gmp.h \
+    ;fi && \
+    docker-php-ext-install gmp \
+;fi
+
+###########################################################################
+# SSH2:
+###########################################################################
+
+ARG INSTALL_SSH2=false
+
+RUN if [ ${INSTALL_SSH2} = true ]; then \
+    # Install the ssh2 extension
+    apt-get -y install libssh2-1-dev && \
+    if [ $(php -r "echo PHP_MAJOR_VERSION;") = "5" ]; then \
+        pecl install -a ssh2-0.13; \
+    else \
+        pecl install -a ssh2-1.2; \
+    fi && \
+    docker-php-ext-enable ssh2 \
+;fi
+
+###########################################################################
+# libfaketime:
+###########################################################################
+
+USER root
+
+ARG INSTALL_FAKETIME=false
+
+RUN if [ ${INSTALL_FAKETIME} = true ]; then \
+    apt-get install -y libfaketime \
+;fi
+
+###########################################################################
+# SOAP:
+###########################################################################
+
+ARG INSTALL_SOAP=false
+
+RUN if [ ${INSTALL_SOAP} = true ]; then \
+    # Install the soap extension
+    rm /etc/apt/preferences.d/no-debian-php && \
+    apt-get -y install libxml2-dev php-soap && \
+    docker-php-ext-install soap \
+;fi
+
+###########################################################################
+# XSL:
+###########################################################################
+
+ARG INSTALL_XSL=false
+
+RUN if [ ${INSTALL_XSL} = true ]; then \
+    # Install the xsl extension
+    apt-get -y install libxslt-dev && \
+    docker-php-ext-install xsl \
+;fi
+
+###########################################################################
+# pgsql
+###########################################################################
+
+ARG INSTALL_PGSQL=false
+
+RUN if [ ${INSTALL_PGSQL} = true ]; then \
+    # Install the pgsql extension
+    docker-php-ext-install pgsql \
+;fi
+
+###########################################################################
+# pgsql client
+###########################################################################
+
+ARG INSTALL_PG_CLIENT=false
+ARG INSTALL_POSTGIS=false
+
+RUN if [ ${INSTALL_PG_CLIENT} = true ]; then \
+    # Create folders if not exists (https://github.com/tianon/docker-brew-debian/issues/65)
+    mkdir -p /usr/share/man/man1 && \
+    mkdir -p /usr/share/man/man7 && \
+    # Install the pgsql client
+    apt-get install -y postgresql-client && \
+    if [ ${INSTALL_POSTGIS} = true ]; then \
+      apt-get install -y postgis; \
+    fi \
+;fi
+
+###########################################################################
+# xDebug:
+###########################################################################
+
+ARG INSTALL_XDEBUG=false
+
+RUN if [ ${INSTALL_XDEBUG} = true ]; then \
+  # Install the xdebug extension
+  if [ $(php -r "echo PHP_MAJOR_VERSION;") = "5" ]; then \
+    pecl install xdebug-2.5.5; \
+  else \
+    if [ $(php -r "echo PHP_MINOR_VERSION;") = "0" ]; then \
+      pecl install xdebug-2.9.0; \
+    else \
+      pecl install xdebug; \
+    fi \
+  fi && \
+  docker-php-ext-enable xdebug \
+;fi
+
+# Copy xdebug configuration for remote debugging
+COPY ./xdebug.ini /usr/local/etc/php/conf.d/xdebug.ini
+
+RUN sed -i "s/xdebug.remote_autostart=0/xdebug.remote_autostart=1/" /usr/local/etc/php/conf.d/xdebug.ini && \
+    sed -i "s/xdebug.remote_enable=0/xdebug.remote_enable=1/" /usr/local/etc/php/conf.d/xdebug.ini && \
+    sed -i "s/xdebug.cli_color=0/xdebug.cli_color=1/" /usr/local/etc/php/conf.d/xdebug.ini
+
+###########################################################################
+# pcov:
+###########################################################################
+
+USER root
+
+ARG INSTALL_PCOV=false
+
+RUN if [ ${INSTALL_PCOV} = true ]; then \
+  if [ $(php -r "echo PHP_MAJOR_VERSION;") = "7" ]; then \
+    if [ $(php -r "echo PHP_MINOR_VERSION;") != "0" ]; then \
+      pecl install pcov && \
+      docker-php-ext-enable pcov \
+    ;fi \
+  ;fi \
+;fi
+
+###########################################################################
+# Phpdbg:
+###########################################################################
+
+ARG INSTALL_PHPDBG=false
+
+RUN if [ ${INSTALL_PHPDBG} = true ]; then \
+    # Load the xdebug extension only with phpunit commands
+    apt-get install -y --force-yes php${LARADOCK_PHP_VERSION}-phpdbg \
+;fi
+
+###########################################################################
+# Blackfire:
+###########################################################################
+
+ARG INSTALL_BLACKFIRE=false
+
+RUN if [ ${INSTALL_XDEBUG} = false -a ${INSTALL_BLACKFIRE} = true ]; then \
+    version=$(php -r "echo PHP_MAJOR_VERSION.PHP_MINOR_VERSION;") \
+    && curl -A "Docker" -o /tmp/blackfire-probe.tar.gz -D - -L -s https://blackfire.io/api/v1/releases/probe/php/linux/amd64/$version \
+    && tar zxpf /tmp/blackfire-probe.tar.gz -C /tmp \
+    && mv /tmp/blackfire-*.so $(php -r "echo ini_get('extension_dir');")/blackfire.so \
+    && printf "extension=blackfire.so\nblackfire.agent_socket=tcp://blackfire:8707\n" > $PHP_INI_DIR/conf.d/blackfire.ini \
+;fi
+
+###########################################################################
+# PHP REDIS EXTENSION
+###########################################################################
+
+ARG INSTALL_PHPREDIS=false
+
+RUN if [ ${INSTALL_PHPREDIS} = true ]; then \
+    # Install Php Redis Extension
+    if [ $(php -r "echo PHP_MAJOR_VERSION;") = "5" ]; then \
+      pecl install -o -f redis-4.3.0; \
+    else \
+      pecl install -o -f redis; \
+    fi \
+    && rm -rf /tmp/pear \
+    && docker-php-ext-enable redis \
+;fi
+
+###########################################################################
+# Swoole EXTENSION
+###########################################################################
+
+ARG INSTALL_SWOOLE=false
+
+RUN if [ ${INSTALL_SWOOLE} = true ]; then \
+    # Install Php Swoole Extension
+    if [ $(php -r "echo PHP_MAJOR_VERSION;") = "5" ]; then \
+      pecl install swoole-2.0.10; \
+    else \
+      if [ $(php -r "echo PHP_MINOR_VERSION;") = "0" ]; then \
+        pecl install swoole-2.2.0; \
+      else \
+        pecl install swoole; \
+      fi \
+    fi && \
+    docker-php-ext-enable swoole \
+    && php -m | grep -q 'swoole' \
+;fi
+
+###########################################################################
+# Taint EXTENSION
+###########################################################################
+
+ARG INSTALL_TAINT=false
+
+RUN if [ ${INSTALL_TAINT} = true ]; then \
+    # Install Php TAINT Extension
+    if [ $(php -r "echo PHP_MAJOR_VERSION;") = "7" ]; then \
+      pecl install taint && \
+      docker-php-ext-enable taint && \
+      php -m | grep -q 'taint'; \
+    fi \
+;fi
+
+###########################################################################
+# MongoDB:
+###########################################################################
+
+ARG INSTALL_MONGO=false
+
+RUN if [ ${INSTALL_MONGO} = true ]; then \
+    # Install the mongodb extension
+    if [ $(php -r "echo PHP_MAJOR_VERSION;") = "5" ]; then \
+      pecl install mongo && \
+      docker-php-ext-enable mongo \
+    ;fi && \
+    pecl install mongodb && \
+    docker-php-ext-enable mongodb \
+;fi
+
+###########################################################################
+# Xhprof:
+###########################################################################
+
+ARG INSTALL_XHPROF=false
+
+RUN if [ ${INSTALL_XHPROF} = true ]; then \
+    # Install the php xhprof extension
+    if [ $(php -r "echo PHP_MAJOR_VERSION;") = 7 ]; then \
+      curl -L -o /tmp/xhprof.tar.gz "https://github.com/tideways/php-xhprof-extension/archive/v5.0.1.tar.gz"; \
+    else \ 
+      curl -L -o /tmp/xhprof.tar.gz "https://codeload.github.com/phacility/xhprof/tar.gz/master"; \
+    fi \
+    && mkdir -p xhprof \
+    && tar -C xhprof -zxvf /tmp/xhprof.tar.gz --strip 1 \
+    && ( \
+        cd xhprof \
+        && phpize \
+        && ./configure \
+        && make \
+        && make install \
+    ) \
+    && rm -r xhprof \
+    && rm /tmp/xhprof.tar.gz \
+;fi
+
+COPY ./xhprof.ini /usr/local/etc/php/conf.d
+
+RUN if [ ${INSTALL_XHPROF} = false ]; then \
+    rm /usr/local/etc/php/conf.d/xhprof.ini \
+;fi
+
+###########################################################################
+# AMQP:
+###########################################################################
+
+ARG INSTALL_AMQP=false
+
+RUN if [ ${INSTALL_AMQP} = true ]; then \
+    # download and install manually, to make sure it's compatible with ampq installed by pecl later
+    # install cmake first
+    apt-get -y install cmake && \
+    curl -L -o /tmp/rabbitmq-c.tar.gz https://github.com/alanxz/rabbitmq-c/archive/master.tar.gz && \
+    mkdir -p rabbitmq-c && \
+    tar -C rabbitmq-c -zxvf /tmp/rabbitmq-c.tar.gz --strip 1 && \
+    cd rabbitmq-c/ && \
+    mkdir _build && cd _build/ && \
+    cmake .. && \
+    cmake --build . --target install && \
+    # Install the amqp extension
+    pecl install amqp && \
+    docker-php-ext-enable amqp && \
+    # Install the sockets extension
+    docker-php-ext-install sockets \
+;fi
+
+###########################################################################
+# GEARMAN:
+###########################################################################
+
+ARG INSTALL_GEARMAN=false
+
+RUN if [ ${INSTALL_GEARMAN} = true ]; then \
+    apt-get -y install libgearman-dev && \
+    cd /tmp && \
+    curl -L https://github.com/wcgallego/pecl-gearman/archive/gearman-2.0.5.zip -O && \
+    unzip gearman-2.0.5.zip && \
+    mv pecl-gearman-gearman-2.0.5 pecl-gearman && \
+    cd /tmp/pecl-gearman && \
+    phpize && \
+    ./configure && \
+    make -j$(nproc) && \
+    make install && \
+    cd / && \
+    rm /tmp/gearman-2.0.5.zip && \
+    rm -r /tmp/pecl-gearman && \
+    docker-php-ext-enable gearman \
+;fi
+
+###########################################################################
+# pcntl
+###########################################################################
+
+ARG INSTALL_PCNTL=false
+RUN if [ ${INSTALL_PCNTL} = true ]; then \
+    # Installs pcntl, helpful for running Horizon
+    docker-php-ext-install pcntl \
+;fi
+
+###########################################################################
+# bcmath:
+###########################################################################
+
+ARG INSTALL_BCMATH=false
+
+RUN if [ ${INSTALL_BCMATH} = true ]; then \
+    # Install the bcmath extension
+    docker-php-ext-install bcmath \
+;fi
+
+###########################################################################
+# PHP Memcached:
+###########################################################################
+
+ARG INSTALL_MEMCACHED=false
+
+RUN if [ ${INSTALL_MEMCACHED} = true ]; then \
+    # Install the php memcached extension
+    if [ $(php -r "echo PHP_MAJOR_VERSION;") = "5" ]; then \
+      pecl install memcached-2.2.0; \
+    else \
+      pecl install memcached-3.1.3; \
+    fi \
+    && docker-php-ext-enable memcached \
+;fi
+
+###########################################################################
+# Exif:
+###########################################################################
+
+ARG INSTALL_EXIF=false
+
+RUN if [ ${INSTALL_EXIF} = true ]; then \
+    # Enable Exif PHP extentions requirements
+    docker-php-ext-install exif \
+;fi
+
+###########################################################################
+# PHP Aerospike:
+###########################################################################
+
+USER root
+
+ARG INSTALL_AEROSPIKE=false
+
+RUN set -xe; \
+    if [ ${INSTALL_AEROSPIKE} = true ]; then \
+    # Fix dependencies for PHPUnit within aerospike extension
+    apt-get -y install sudo wget && \
+    # Install the php aerospike extension
+    if [ $(php -r "echo PHP_MAJOR_VERSION;") = "5" ]; then \
+      curl -L -o /tmp/aerospike-client-php.tar.gz https://github.com/aerospike/aerospike-client-php5/archive/master.tar.gz; \
+    else \
+      curl -L -o /tmp/aerospike-client-php.tar.gz https://github.com/aerospike/aerospike-client-php/archive/master.tar.gz; \
+    fi \
+    && mkdir -p /tmp/aerospike-client-php \
+    && tar -C /tmp/aerospike-client-php -zxvf /tmp/aerospike-client-php.tar.gz --strip 1 \
+    && \
+    if [ $(php -r "echo PHP_MAJOR_VERSION;") = "5" ]; then \
+      ( \
+          cd /tmp/aerospike-client-php/src/aerospike \
+          && phpize \
+          && ./build.sh \
+          && make install \
+      ) \
+    else \
+      ( \
+          cd /tmp/aerospike-client-php/src \
+          && phpize \
+          && ./build.sh \
+          && make install \
+      ) \
+    fi \
+    && rm /tmp/aerospike-client-php.tar.gz \
+    && docker-php-ext-enable aerospike \
+;fi
+
+###########################################################################
+# PHP OCI8:
+###########################################################################
+
+ARG INSTALL_OCI8=false
+
+ENV LD_LIBRARY_PATH="/opt/oracle/instantclient_12_1"
+ENV OCI_HOME="/opt/oracle/instantclient_12_1"
+ENV OCI_LIB_DIR="/opt/oracle/instantclient_12_1"
+ENV OCI_INCLUDE_DIR="/opt/oracle/instantclient_12_1/sdk/include"
+ENV OCI_VERSION=12
+
+RUN if [ ${INSTALL_OCI8} = true ]; then \
+    # Install wget
+    apt-get update && apt-get install --no-install-recommends -y wget \
+    # Install Oracle Instantclient
+    && mkdir /opt/oracle \
+        && cd /opt/oracle \
+        && wget https://github.com/diogomascarenha/oracle-instantclient/raw/master/instantclient-basic-linux.x64-12.1.0.2.0.zip \
+        && wget https://github.com/diogomascarenha/oracle-instantclient/raw/master/instantclient-sdk-linux.x64-12.1.0.2.0.zip \
+        && unzip /opt/oracle/instantclient-basic-linux.x64-12.1.0.2.0.zip -d /opt/oracle \
+        && unzip /opt/oracle/instantclient-sdk-linux.x64-12.1.0.2.0.zip -d /opt/oracle \
+        && ln -s /opt/oracle/instantclient_12_1/libclntsh.so.12.1 /opt/oracle/instantclient_12_1/libclntsh.so \
+        && ln -s /opt/oracle/instantclient_12_1/libclntshcore.so.12.1 /opt/oracle/instantclient_12_1/libclntshcore.so \
+        && ln -s /opt/oracle/instantclient_12_1/libocci.so.12.1 /opt/oracle/instantclient_12_1/libocci.so \
+        && rm -rf /opt/oracle/*.zip \
+    # Install PHP extensions deps
+    && apt-get update \
+        && apt-get install --no-install-recommends -y \
+            libaio-dev \
+            freetds-dev && \
+    # Install PHP extensions
+    if [ $(php -r "echo PHP_MAJOR_VERSION;") = "5" ]; then \
+      echo 'instantclient,/opt/oracle/instantclient_12_1/' | pecl install oci8-2.0.10; \
+    else \
+      echo 'instantclient,/opt/oracle/instantclient_12_1/' | pecl install oci8; \
+    fi \
+        && docker-php-ext-configure pdo_oci --with-pdo-oci=instantclient,/opt/oracle/instantclient_12_1,12.1 \
+        && docker-php-ext-configure pdo_dblib --with-libdir=/lib/x86_64-linux-gnu \
+        && docker-php-ext-install \
+                pdo_oci \
+        && docker-php-ext-enable \
+                oci8 \
+  ;fi
+
+###########################################################################
+# IonCube Loader:
+###########################################################################
+
+ARG INSTALL_IONCUBE=false
+
+RUN if [ ${INSTALL_IONCUBE} = true ]; then \
+    # Install the php ioncube loader
+    curl -L -o /tmp/ioncube_loaders_lin_x86-64.tar.gz https://downloads.ioncube.com/loader_downloads/ioncube_loaders_lin_x86-64.tar.gz \
+    && tar zxpf /tmp/ioncube_loaders_lin_x86-64.tar.gz -C /tmp \
+    && mv /tmp/ioncube/ioncube_loader_lin_${LARADOCK_PHP_VERSION}.so $(php -r "echo ini_get('extension_dir');")/ioncube_loader.so \
+    && printf "zend_extension=ioncube_loader.so\n" > $PHP_INI_DIR/conf.d/0ioncube.ini \
+    && rm -rf /tmp/ioncube* \
+;fi
+
+###########################################################################
+# Opcache:
+###########################################################################
+
+ARG INSTALL_OPCACHE=false
+
+RUN if [ ${INSTALL_OPCACHE} = true ]; then \
+    docker-php-ext-install opcache \
+;fi
+
+# Copy opcache configration
+COPY ./opcache.ini /usr/local/etc/php/conf.d/opcache.ini
+
+###########################################################################
+# Mysqli Modifications:
+###########################################################################
+
+ARG INSTALL_MYSQLI=false
+
+RUN if [ ${INSTALL_MYSQLI} = true ]; then \
+    docker-php-ext-install mysqli \
+;fi
+
+
+###########################################################################
+# Human Language and Character Encoding Support:
+###########################################################################
+
+ARG INSTALL_INTL=false
+
+RUN if [ ${INSTALL_INTL} = true ]; then \
+    # Install intl and requirements
+    apt-get install -y zlib1g-dev libicu-dev g++ && \
+    docker-php-ext-configure intl && \
+    docker-php-ext-install intl \
+;fi
+
+###########################################################################
+# GHOSTSCRIPT:
+###########################################################################
+
+ARG INSTALL_GHOSTSCRIPT=false
+
+RUN if [ ${INSTALL_GHOSTSCRIPT} = true ]; then \
+    # Install the ghostscript extension
+    # for PDF editing
+    apt-get install -y \
+    poppler-utils \
+    ghostscript \
+;fi
+
+###########################################################################
+# LDAP:
+###########################################################################
+
+ARG INSTALL_LDAP=false
+
+RUN if [ ${INSTALL_LDAP} = true ]; then \
+    apt-get install -y libldap2-dev && \
+    docker-php-ext-configure ldap --with-libdir=lib/x86_64-linux-gnu/ && \
+    docker-php-ext-install ldap \
+;fi
+
+###########################################################################
+# SQL SERVER:
+###########################################################################
+
+ARG INSTALL_MSSQL=false
+
+RUN set -eux; \
+  if [ ${INSTALL_MSSQL} = true ]; then \
+    if [ $(php -r "echo PHP_MAJOR_VERSION;") = "5" ]; then \
+      apt-get -y install freetds-dev libsybdb5 \
+      && ln -s /usr/lib/x86_64-linux-gnu/libsybdb.so /usr/lib/libsybdb.so \
+      && docker-php-ext-install mssql pdo_dblib \
+      && php -m | grep -q 'mssql' \
+      && php -m | grep -q 'pdo_dblib' \
+    ;else \
+      ###########################################################################
+      # Ref from https://github.com/Microsoft/msphpsql/wiki/Dockerfile-for-adding-pdo_sqlsrv-and-sqlsrv-to-official-php-image
+      ###########################################################################
+      # Add Microsoft repo for Microsoft ODBC Driver 13 for Linux
+      apt-get install -y apt-transport-https gnupg \
+      && curl https://packages.microsoft.com/keys/microsoft.asc | apt-key add - \
+      && curl https://packages.microsoft.com/config/debian/9/prod.list > /etc/apt/sources.list.d/mssql-release.list \
+      && apt-get update -yqq \
+      # Install Dependencies
+      && ACCEPT_EULA=Y apt-get install -y unixodbc unixodbc-dev libgss3 odbcinst msodbcsql17 locales \
+      && echo "en_US.UTF-8 UTF-8" > /etc/locale.gen \
+      # link local aliases
+      && ln -sfn /etc/locale.alias /usr/share/locale/locale.alias \
+      && locale-gen \
+      # Install pdo_sqlsrv and sqlsrv from PECL. Replace pdo_sqlsrv-4.1.8preview with preferred version.
+      && if [ $(php -r "echo PHP_MINOR_VERSION;") = "0" ]; then \
+        pecl install pdo_sqlsrv-5.3.0 sqlsrv-5.3.0 \
+      ;else \
+        pecl install pdo_sqlsrv sqlsrv \
+      ;fi \
+      && docker-php-ext-enable pdo_sqlsrv sqlsrv \
+      && php -m | grep -q 'pdo_sqlsrv' \
+      && php -m | grep -q 'sqlsrv' \
+    ;fi \
+  ;fi
+
+###########################################################################
+# Image optimizers:
+###########################################################################
+
+USER root
+
+ARG INSTALL_IMAGE_OPTIMIZERS=false
+
+RUN if [ ${INSTALL_IMAGE_OPTIMIZERS} = true ]; then \
+    apt-get install -y jpegoptim optipng pngquant gifsicle \
+;fi
+
+###########################################################################
+# ImageMagick:
+###########################################################################
+
+USER root
+
+ARG INSTALL_IMAGEMAGICK=false
+
+RUN if [ ${INSTALL_IMAGEMAGICK} = true ]; then \
+    apt-get install -y libmagickwand-dev imagemagick && \
+    pecl install imagick && \
+    docker-php-ext-enable imagick \
+;fi
+
+###########################################################################
+# SMB:
+###########################################################################
+
+ARG INSTALL_SMB=false
+
+RUN if [ ${INSTALL_SMB} = true ]; then \
+    apt-get install -y smbclient php-smbclient coreutils \
+;fi
+
+###########################################################################
+# IMAP:
+###########################################################################
+
+ARG INSTALL_IMAP=false
+
+RUN if [ ${INSTALL_IMAP} = true ]; then \
+    apt-get install -y libc-client-dev libkrb5-dev && \
+    docker-php-ext-configure imap --with-kerberos --with-imap-ssl && \
+    docker-php-ext-install imap \
+;fi
+
+###########################################################################
+# Calendar:
+###########################################################################
+
+USER root
+
+ARG INSTALL_CALENDAR=false
+
+RUN if [ ${INSTALL_CALENDAR} = true ]; then \
+    docker-php-ext-configure calendar && \
+    docker-php-ext-install calendar \
+;fi
+
+###########################################################################
+# Phalcon:
+###########################################################################
+
+ARG INSTALL_PHALCON=false
+ARG LARADOCK_PHALCON_VERSION
+ENV LARADOCK_PHALCON_VERSION ${LARADOCK_PHALCON_VERSION}
+
+# Copy phalcon configration
+COPY ./phalcon.ini /usr/local/etc/php/conf.d/phalcon.ini.disable
+
+RUN if [ $INSTALL_PHALCON = true ]; then \
+    apt-get update && apt-get install -y unzip libpcre3-dev gcc make re2c git automake autoconf\
+    && git clone https://github.com/jbboehr/php-psr.git \
+    && cd php-psr \
+    && phpize \
+    && ./configure \
+    && make \
+    && make test \
+    && make install \
+    && curl -L -o /tmp/cphalcon.zip https://github.com/phalcon/cphalcon/archive/v${LARADOCK_PHALCON_VERSION}.zip \
+    && unzip -d /tmp/ /tmp/cphalcon.zip \
+    && cd /tmp/cphalcon-${LARADOCK_PHALCON_VERSION}/build \
+    && ./install \
+    && mv /usr/local/etc/php/conf.d/phalcon.ini.disable /usr/local/etc/php/conf.d/phalcon.ini \
+    && rm -rf /tmp/cphalcon* \
+;fi
+
+###########################################################################
+# APCU:
+###########################################################################
+
+ARG INSTALL_APCU=false
+
+RUN if [ ${INSTALL_APCU} = true ]; then \
+    if [ $(php -r "echo PHP_MAJOR_VERSION;") = "5" ]; then \
+        pecl install -a apcu-4.0.11; \
+    else \
+        pecl install apcu; \
+    fi && \
+    docker-php-ext-enable apcu \
+;fi
+
+###########################################################################
+# YAML:
+###########################################################################
+
+USER root
+
+ARG INSTALL_YAML=false
+
+RUN if [ ${INSTALL_YAML} = true ]; then \
+    apt-get install libyaml-dev -y ; \
+    if [ $(php -r "echo PHP_MAJOR_VERSION;") = "5" ]; then \
+        pecl install -a yaml-1.3.2; \
+    else \
+        pecl install yaml; \
+    fi && \
+    docker-php-ext-enable yaml \
+;fi
+
+###########################################################################
+# RDKAFKA:
+###########################################################################
+
+ARG INSTALL_RDKAFKA=false
+
+RUN if [ ${INSTALL_RDKAFKA} = true ]; then \
+    apt-get install -y librdkafka-dev && \
+    pecl install rdkafka && \
+    docker-php-ext-enable rdkafka \
+;fi
+
+###########################################################################
+# GETTEXT:
+###########################################################################
+
+ARG INSTALL_GETTEXT=false
+
+RUN if [ ${INSTALL_GETTEXT} = true ]; then \
+    apt-get install -y zlib1g-dev libicu-dev g++ libpq-dev libssl-dev gettext && \
+    docker-php-ext-install gettext \
+;fi
+
+###########################################################################
+# Install additional locales:
+###########################################################################
+
+ARG INSTALL_ADDITIONAL_LOCALES=false
+ARG ADDITIONAL_LOCALES
+
+RUN if [ ${INSTALL_ADDITIONAL_LOCALES} = true ]; then \
+    apt-get install -y locales \
+    && echo '' >> /usr/share/locale/locale.alias \
+    && temp="${ADDITIONAL_LOCALES%\"}" \
+    && temp="${temp#\"}" \
+    && for i in ${temp}; do sed -i "/$i/s/^#//g" /etc/locale.gen; done \
+    && locale-gen \
+;fi
+
+###########################################################################
+# MySQL Client:
+###########################################################################
+
+USER root
+
+ARG INSTALL_MYSQL_CLIENT=false
+
+RUN if [ ${INSTALL_MYSQL_CLIENT} = true ]; then \
+      apt-get -y install default-mysql-client \
+;fi
+
+###########################################################################
+# ping:
+###########################################################################
+
+USER root
+
+ARG INSTALL_PING=false
+
+RUN if [ ${INSTALL_PING} = true ]; then \
+    apt-get -y install inetutils-ping \
+;fi
+
+###########################################################################
+# sshpass:
+###########################################################################
+
+USER root
+
+ARG INSTALL_SSHPASS=false
+
+RUN if [ ${INSTALL_SSHPASS} = true ]; then \
+    apt-get -y install sshpass \
+;fi
+
+###########################################################################
+# FFMPEG:
+###########################################################################
+
+USER root
+
+ARG INSTALL_FFMPEG=false
+
+RUN if [ ${INSTALL_FFMPEG} = true ]; then \
+    apt-get -y install ffmpeg \
+;fi
+
+#####################################
+# wkhtmltopdf:
+#####################################
+
+USER root
+
+ARG INSTALL_WKHTMLTOPDF=false
+
+RUN if [ ${INSTALL_WKHTMLTOPDF} = true ]; then \
+    apt-get install -y \
+    libxrender1 \
+    libfontconfig1 \
+    libx11-dev \
+    libjpeg62 \
+    libxtst6 \
+    wget \
+    && wget https://github.com/h4cc/wkhtmltopdf-amd64/blob/master/bin/wkhtmltopdf-amd64?raw=true -O /usr/local/bin/wkhtmltopdf \
+    && chmod +x /usr/local/bin/wkhtmltopdf \
+;fi
+
+###########################################################################
+# Mailparse extension:
+###########################################################################
+
+ARG INSTALL_MAILPARSE=false
+
+RUN if [ ${INSTALL_MAILPARSE} = true ]; then \
+    # Install mailparse extension
+    printf "\n" | pecl install -o -f mailparse \
+    &&  rm -rf /tmp/pear \
+    &&  docker-php-ext-enable mailparse \
+;fi
+
+###########################################################################
+# CacheTool:
+###########################################################################
+
+ARG INSTALL_CACHETOOL=false
+
+RUN if [ ${INSTALL_CACHETOOL} = true ]; then \
+    if [ $(php -r "echo PHP_MAJOR_VERSION;") = "7" ] && [ $(php -r "echo PHP_MINOR_VERSION;") -ge 1 ]; then \
+            curl -sO http://gordalina.github.io/cachetool/downloads/cachetool.phar; \
+    else \
+        curl http://gordalina.github.io/cachetool/downloads/cachetool-3.2.1.phar -o cachetool.phar; \
+    fi && \
+    chmod +x cachetool.phar && \
+    mv cachetool.phar /usr/local/bin/cachetool \
+;fi
+
+###########################################################################
+# XMLRPC:
+###########################################################################
+
+ARG INSTALL_XMLRPC=false
+
+RUN if [ ${INSTALL_XMLRPC} = true ]; then \
+    docker-php-ext-install xmlrpc \
+;fi
+
+###########################################################################
+# Check PHP version:
+###########################################################################
+
+RUN set -xe; php -v | head -n 1 | grep -q "PHP ${LARADOCK_PHP_VERSION}."
+
+#
+#--------------------------------------------------------------------------
+# Final Touch
+#--------------------------------------------------------------------------
+#
+
+COPY ./laravel.ini /usr/local/etc/php/conf.d
+COPY ./xlaravel.pool.conf /usr/local/etc/php-fpm.d/
+
+USER root
+
+# Clean up
+RUN apt-get clean && \
+    rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/* && \
+    rm /var/log/lastlog /var/log/faillog
+
+# Configure non-root user.
+ARG PUID=1000
+ENV PUID ${PUID}
+ARG PGID=1000
+ENV PGID ${PGID}
+
+RUN groupmod -o -g ${PGID} www-data && \
+    usermod -o -u ${PUID} -g www-data www-data
+
+# Adding the faketime library to the preload file needs to be done last
+# otherwise it will preload it for all commands that follow in this file
+RUN if [ ${INSTALL_FAKETIME} = true ]; then \
+    echo "/usr/lib/x86_64-linux-gnu/faketime/libfaketime.so.1" > /etc/ld.so.preload \
+;fi
+
+# Configure locale.
+ARG LOCALE=POSIX
+ENV LC_ALL ${LOCALE}
+
+WORKDIR /var/www
+
+CMD ["php-fpm"]
+
+EXPOSE 9000

laradock/php-fpm/aerospike.ini

@@ -0,0 +1,3 @@
+extension=aerospike.so
+aerospike.udf.lua_system_path=/usr/local/aerospike/lua
+aerospike.udf.lua_user_path=/usr/local/aerospike/usr-lua

laradock/php-fpm/laravel.ini

@@ -0,0 +1,16 @@
+date.timezone=UTC
+display_errors=Off
+log_errors=On
+
+; Maximum amount of memory a script may consume (128MB)
+; http://php.net/memory-limit
+memory_limit = 256M
+; Maximum allowed size for uploaded files.
+; http://php.net/upload-max-filesize
+upload_max_filesize = 20M
+; Sets max size of post data allowed.
+; http://php.net/post-max-size
+post_max_size = 20M
+max_execution_time=600
+default_socket_timeout=3600
+request_terminate_timeout=600

laradock/php-fpm/mysql.ini

@@ -0,0 +1,58 @@
+[MySQL]
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysql.allow_local_infile
+mysql.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysql.allow-persistent
+mysql.allow_persistent = On
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysql.cache_size
+mysql.cache_size = 2000
+
+; Maximum number of persistent links.  -1 means no limit.
+; http://php.net/mysql.max-persistent
+mysql.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent).  -1 means no limit.
+; http://php.net/mysql.max-links
+mysql.max_links = -1
+
+; Default port number for mysql_connect().  If unset, mysql_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order).  Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysql.default-port
+mysql.default_port =
+
+; Default socket name for local MySQL connects.  If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysql.default-socket
+mysql.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-host
+mysql.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysql.default-user
+mysql.default_user =
+
+; Default password for mysql_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
+; and reveal this password!  And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysql.default-password
+mysql.default_password =
+
+; Maximum time (in seconds) for connect timeout. -1 means no limit
+; http://php.net/mysql.connect-timeout
+mysql.connect_timeout = 60
+
+; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
+; SQL-Errors will be displayed.
+; http://php.net/mysql.trace-mode
+mysql.trace_mode = Off
+

laradock/php-fpm/opcache.ini

@@ -0,0 +1,9 @@
+; NOTE: The actual opcache.so extention is NOT SET HERE but rather (/usr/local/etc/php/conf.d/docker-php-ext-opcache.ini)
+
+opcache.enable=1
+opcache.memory_consumption=256
+opcache.use_cwd=0
+opcache.max_file_size=0
+opcache.max_accelerated_files=30000
+opcache.validate_timestamps=1
+opcache.revalidate_freq=0

laradock/php-fpm/phalcon.ini

@@ -0,0 +1,2 @@
+extension=psr.so
+extension=phalcon.so

laradock/php-fpm/xdebug

@@ -0,0 +1,101 @@
+#! /bin/bash
+
+# NOTE: At the moment, this has only been confirmed to work with PHP 7
+
+
+# Grab full name of php-fpm container
+PHP_FPM_CONTAINER=$(docker ps | grep php-fpm | awk '{print $1}')
+
+
+# Grab OS type
+if [[ "$(uname)" == "Darwin" ]]; then
+    OS_TYPE="OSX"
+else
+    OS_TYPE=$(expr substr $(uname -s) 1 5)
+fi
+
+
+xdebug_status ()
+{
+    echo 'xDebug status'
+
+    # If running on Windows, need to prepend with winpty :(
+    if [[ $OS_TYPE == "MINGW" ]]; then
+        winpty docker exec -it $PHP_FPM_CONTAINER bash -c 'php -v'
+
+    else
+        docker exec -it $PHP_FPM_CONTAINER bash -c 'php -v'
+    fi
+
+}
+
+
+xdebug_start ()
+{
+    echo 'Start xDebug'
+
+    # And uncomment line with xdebug extension, thus enabling it
+    ON_CMD="sed -i 's/^;zend_extension=/zend_extension=/g' \
+                    /usr/local/etc/php/conf.d/xdebug.ini"
+
+
+    # If running on Windows, need to prepend with winpty :(
+    if [[ $OS_TYPE == "MINGW" ]]; then
+        winpty docker exec -it $PHP_FPM_CONTAINER bash -c "${ON_CMD}"
+        docker restart $PHP_FPM_CONTAINER
+        winpty docker exec -it $PHP_FPM_CONTAINER bash -c 'php -v'
+
+    else
+        docker exec -it $PHP_FPM_CONTAINER bash -c "${ON_CMD}"
+        docker restart $PHP_FPM_CONTAINER
+        docker exec -it $PHP_FPM_CONTAINER bash -c 'php -v'
+    fi
+}
+
+
+xdebug_stop ()
+{
+    echo 'Stop xDebug'
+
+    # Comment out xdebug extension line
+    OFF_CMD="sed -i 's/^zend_extension=/;zend_extension=/g' /usr/local/etc/php/conf.d/xdebug.ini"
+
+
+    # If running on Windows, need to prepend with winpty :(
+    if [[ $OS_TYPE == "MINGW" ]]; then
+        # This is the equivalent of:
+        # winpty docker exec -it laradock_php-fpm_1 bash -c 'bla bla bla'
+        # Thanks to @michaelarnauts at https://github.com/docker/compose/issues/593
+        winpty docker exec -it $PHP_FPM_CONTAINER bash -c "${OFF_CMD}"
+        docker restart $PHP_FPM_CONTAINER
+        #docker-compose restart php-fpm
+        winpty docker exec -it $PHP_FPM_CONTAINER bash -c 'php -v'
+
+    else
+        docker exec -it $PHP_FPM_CONTAINER bash -c "${OFF_CMD}"
+        # docker-compose restart php-fpm
+        docker restart $PHP_FPM_CONTAINER
+        docker exec -it $PHP_FPM_CONTAINER bash -c 'php -v'
+    fi
+}
+
+
+case $@ in
+    stop|STOP)
+        xdebug_stop
+        ;;
+    start|START)
+        xdebug_start
+        ;;
+    status|STATUS)
+        xdebug_status
+        ;;
+    *)
+        echo "xDebug [Stop | Start | Status] in the ${PHP_FPM_CONTAINER} container."
+        echo "xDebug must have already been installed."
+        echo "Usage:"
+        echo "  .php-fpm/xdebug stop|start|status"
+
+esac
+
+exit 1

laradock/php-fpm/xdebug.ini

@@ -0,0 +1,19 @@
+; NOTE: The actual debug.so extention is NOT SET HERE but rather (/usr/local/etc/php/conf.d/docker-php-ext-xdebug.ini)
+
+xdebug.remote_host="host.docker.internal"
+xdebug.remote_connect_back=0
+xdebug.remote_port=9000
+xdebug.idekey=PHPSTORM
+
+xdebug.remote_autostart=0
+xdebug.remote_enable=0
+xdebug.cli_color=0
+xdebug.profiler_enable=0
+xdebug.profiler_output_dir="~/xdebug/phpstorm/tmp/profiling"
+
+xdebug.remote_handler=dbgp
+xdebug.remote_mode=req
+
+xdebug.var_display_max_children=-1
+xdebug.var_display_max_data=-1
+xdebug.var_display_max_depth=-1

laradock/php-fpm/xhprof.ini

@@ -0,0 +1,8 @@
+[xhprof]
+; extension=xhprof.so
+extension=tideways_xhprof.so
+xhprof.output_dir=/var/www/xhprof
+; no need to autoload, control in the program
+tideways.auto_prepend_library=0
+; set default rate
+tideways.sample_rate=100

laradock/php-fpm/xlaravel.pool.conf

@@ -0,0 +1,76 @@
+; Unix user/group of processes
+; Note: The user is mandatory. If the group is not set, the default user's group
+;       will be used.
+user = www-data
+group = www-data
+
+; The address on which to accept FastCGI requests.
+; Valid syntaxes are:
+;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific address on
+;                            a specific port;
+;   'port'                 - to listen on a TCP socket to all addresses on a
+;                            specific port;
+;   '/path/to/unix/socket' - to listen on a unix socket.
+; Note: This value is mandatory.
+listen = 0.0.0.0:9000
+
+; Choose how the process manager will control the number of child processes.
+; Possible Values:
+;   static  - a fixed number (pm.max_children) of child processes;
+;   dynamic - the number of child processes are set dynamically based on the
+;             following directives. With this process management, there will be
+;             always at least 1 children.
+;             pm.max_children      - the maximum number of children that can
+;                                    be alive at the same time.
+;             pm.start_servers     - the number of children created on startup.
+;             pm.min_spare_servers - the minimum number of children in 'idle'
+;                                    state (waiting to process). If the number
+;                                    of 'idle' processes is less than this
+;                                    number then some children will be created.
+;             pm.max_spare_servers - the maximum number of children in 'idle'
+;                                    state (waiting to process). If the number
+;                                    of 'idle' processes is greater than this
+;                                    number then some children will be killed.
+;  ondemand - no children are created at startup. Children will be forked when
+;             new requests will connect. The following parameter are used:
+;             pm.max_children           - the maximum number of children that
+;                                         can be alive at the same time.
+;             pm.process_idle_timeout   - The number of seconds after which
+;                                         an idle process will be killed.
+; Note: This value is mandatory.
+pm = dynamic
+
+; The number of child processes to be created when pm is set to 'static' and the
+; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
+; This value sets the limit on the number of simultaneous requests that will be
+; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
+; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
+; CGI. The below defaults are based on a server without much resources. Don't
+; forget to tweak pm.* to fit your needs.
+; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
+; Note: This value is mandatory.
+pm.max_children = 20
+
+; The number of child processes created on startup.
+; Note: Used only when pm is set to 'dynamic'
+; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
+pm.start_servers = 2
+
+; The desired minimum number of idle server processes.
+; Note: Used only when pm is set to 'dynamic'
+; Note: Mandatory when pm is set to 'dynamic'
+pm.min_spare_servers = 1
+
+; The desired maximum number of idle server processes.
+; Note: Used only when pm is set to 'dynamic'
+; Note: Mandatory when pm is set to 'dynamic'
+pm.max_spare_servers = 3
+
+;---------------------
+
+; Make specific Docker environment variables available to PHP
+env[DB_1_ENV_MYSQL_DATABASE] = $DB_1_ENV_MYSQL_DATABASE
+env[DB_1_ENV_MYSQL_USER] = $DB_1_ENV_MYSQL_USER
+env[DB_1_ENV_MYSQL_PASSWORD] = $DB_1_ENV_MYSQL_PASSWORD
+
+catch_workers_output = yes